S1900fru, STREFA LAPTOP, tryb SERWIS TOSHIBA
[ Pobierz całość w formacie PDF ]
FIELD REPLACEABLE UNIT DOCUMENTATION
Satellite
1900 Series
GENERAL INFORMATION
Tools Required for Proper
Disassembly and Reassembly:
1. Phillips Screwdrivers (Size 1&0)
2. 3mm Flat head Screwdriver
3. Security Torx (Size 6)
4. Case Separator
5. ESD Wrist Strap
6. ESD mat
7. Tweezers
Before attempting any of the following procedures,
make sure that the main battery and AC adaptor is
not connected to the unit and the environment in
which you are working on is protected from
Electro-Static Discharge(ESD).
TOSHIBA
TM
Tough Enough for Today’s World
FIELD REPLACEABLE UNIT DOCUMENTATION
Satellite
1900 Series
TABLE OF CONTENTS:
TOSHIBA
Tough Enough for Today’s World
TM
FIELD REPLACEABLE UNIT DOCUMENTATION
Satellite
TM
1900 Series
BATTERY PACK REMOVAL
OPTIONAL PC CARD REMOVAL
Battery
release lever
Battery pack
Eject button
PC Card
1. Turn the computer upside down as shown.
2. Slide the
battery release lever
in the direction of the
arrow.
3. Lift out the
battery pack
.
4. Separate the battery pack from the battery cover.
1. Press the
eject button
of the PC Card you want to
remove.
2. Press the extended
eject button
to pop the
PC card
out slightly.
3. Grasp the
PC Card
and pull it out
NOTE
: Before removing any PCMCIA device, make
make it is “STOPPED” in the PC Card Manager.
HDD REMOVAL
M3x3 silver screws
HDD plate
HDD interface
connector
M3x3 silver screws
HDD cover
M2.5x4 black screw
HDD bracket
1. Turn the computer upside down.
2. Remove
two M2.5x4 black screw
securing
HDD assembly and lift it out.
3. Remove the
HDD interface connector
.
4. Remove
two M3x3 silver screws
securing the HDD
plate and lift out the
plate
.
5. Remove
four M3x3 silver screws
securing the HDD
bracket and separate the HDD from the bracket..
.
TOSHIBA
Tough Enough for Today’s World
FIELD REPLACEABLE UNIT DOCUMENTATION
Satellite
TM
1900 Series
FDD REMOVAL
M2x3 black screws
Bezel
FDD cable
FDD cable
FDD assy
M2.5x4 black screw
1. Remove
one M2.5x4 black screw
securing the FDD
assembly.
2. Disconnect the
FDD cable
from the system board.
3. Slide the
FDD assembly
to the right and lift it out.
4. Remove
two M2x3 black screws
securing the
FDD bezel from the FDD and lift out the
bezel
.
5. Disconnect the
FDD cable
from the FDD.
MEMORY MODULE REMOVAL
Memory module
M2.5x4 black screws
Memory clips
1. Turn the computer upside down.
2. Remove
four M2.5x4 black screws
securing the
memory cover.
3. Lift out the
cover
.
4. Gently press out on the
memory clips
and pull the
memory module out of the connector on a 45 degree
angle.
TOSHIBA
Tough Enough for Today’s World
FIELD REPLACEABLE UNIT DOCUMENTATION
Satellite
TM
1900 Series
MINI PCI CARD REMOVAL
Mini PCI card
Mini PCI slot cover
M2.5x4 black torx screws
PCI clips
1. Remove
one M2.5x4 black torx screws
securing
the Mini PCI slot cover.
2. Gently press out the
Mini PCI slot clips
and pull the
Mini PCI card
out of the connector on a 30 degree
angle.
CD-R/W/DVD-ROM DRIVE REMOVAL
Bezel
M2x3 black screws
M2.5x4
black screw
M2x3 black screws
Bracket
DVD-ROM drive
1. Remove
one
M2.5x4 black screws
securing the
DVD-ROM drive.
2. Slide the
DVD-ROM drive
to the left to disconnect it from
PJ23 on the system board.
3. Remove
two M2x3 black screws
securing the
CD-R/W/DVD-ROM bracket and lift it out.
4. Remove
three M2x3 black screws
securing the
CD-R/W/DVD-ROM bezel and lift it out.
TOSHIBA
Tough Enough for Today’s World
[ Pobierz całość w formacie PDF ]